Light it up part 8 - It's not all smooth

Part 1-The Design | 2-Model Making | 3-Making the First Mold | 4-Making the Second Mold | 5-Chopping it up! | 6-Starting to Cast | 7-Cast on

Lumps from recycled greenware in the wet slip. Had to even out the wall thickness.

More arm work out - lifted the castings and 60lb molds onto the shelf to sit overnight.

Due to the inconsistency of the slip, there is uneven wall thickness in the casting in the background causing a dent.

Decided it was best to destroy it and recycle but not without some hesitation.

Recycled pieces.

1st set bisque fired.

Let's see how strong this connection is.


Part 9-Drill and Dremel | 10-Faster now | 11-Glazing | 12-It works!